Carr Light Wing Applications
Light Wings are "universal fit" and can be mounted to any flat bumper surface.
The following recommended list shows applications that have been tested
to work with good results. It is by no means a complete list.
YEAR MFG MODEL COMMENTS
73-87 CHEVY C/K FULL SIZE PICK UP SUBURBAN FACTORY LOCATION
88-98 CHEVY C/K FULL SIZE PICK UP SUBURBAN FACTORY LOCATION
99-02 CHEVY SILVERADO FULL SIZE PICK UP FACTORY LOCATION
00-02 CHEVY SUBURBAN/YUKON XL FACTORY LOCATION
00-02 CHEVY TAHOE/YUKON FACTORY LOCATION
02 CHEVY TRAIL BLAZER DRILLING REQUIRED, SEE NOTE*1
74-93 DODGE PICK UP FULL SIZE ALL FACTORY LOCATION
94-01 DODGE PICK UP FULL SIZE ALL RELOCATION REQUIRED, SEE NOTE*2
02 DODGE PICK UP FULL SIZE ALL REQUIRES CUSTOM MOUNTING KIT, SEE NOTE*4
92-96 FORD F150 RELOCATION REQUIRED, SEE NOTE*2
97-98 FORD F150 WILL NOT FIT BUMPERS WITH SCULPTED CENTER SECTION
99-03 FORD F150 ALL RELOCATION REQUIRED, SEE NOTE*2
99-04 FORD F250/F350 SUPER DUTY RELOCATION REQUIRED, SEE NOTE*2
01-02 FORD EXPLORER RELOCATION REQUIRED, SEE NOTE*2
96-99 FORD EXPLORER RELOCATION REQUIRED, SEE NOTE*2
97-98 FORD EXPEDITION WILL NOT FIT BUMPERS WITH SCULPTED CENTER SECTION
99-02 FORD EXPEDITION RELOCATION REQUIRED, SEE NOTE*2
ALL FORD EXCURSION RELOCATION REQUIRED, SEE NOTE*2
98-02 FORD RANGER FACTORY LOCATION
00-04 FORD FOCUS FACTORY LOCATION, DRILLING MAYBE REQUIRED, NOTE *1
ALL HONDA CRV FACTORY LOCATION
ALL HONDA PASSPORT FACTORY LOCATION
97-02 HONDA CIVIC FACTORY LOCATION, SEE NOTE *1
ALL ISUZU TROOPER FACTORY LOCATION
ALL ISUZU RODEO FACTORY LOCATION
93-99 JEEP GRAND CHEROKEE FACTORY LOCATION
00-01 JEEP GRAND CHEROKEE FACTORY LOCATION, SEE NOTE *2
ALL JEEP CHEROKEE FACTORY LOCATION
86-06 JEEP WRANGLER FACTORY LOCATION
ALL JEEP CJ5/CJ7 FACTORY LOCATION
99-02 MITSUBISHI MONTERO SPORT FACTORY LOCATION
01-02 MITSUBISHI MONTERO RELOCATION REQUIRED, SEE NOTE*2
86-94 NISSAN PICKUP PATHFINDER FACTORY LOCATION
98-99 NISSAN FRONTIER RELOCATION REQUIRED, SEE NOTE*1
00-01 NISSAN FRONTIER RELOCATION REQUIRED, SEE NOTE*1
99-01 NISSAN PATHFINDER FACTORY LOCATION
99-01 NISSAN XTERRA REQUIRES CUSTOM MOUNTING KIT SEE NOTE*5
ALL TOYOTA HIGHLANDER FACTORY LOCATION, SEE NOTE*1
ALL TOYOTA TACOMA RELOCATION REQUIRED, SEE NOTE*2
89-95 TOYOTA PICK UP FACTORY LOCATION
96-01 TOYOTA 4 RUNNER RELOCATION REQUIRED, SEE NOTE*2
89-95 TOYOTA 4 RUNNER FACTORY LOCATION
00-06 TOYOTA TUNDRA RELOCATION REQUIRED, SEE NOTE*2
01-06 TOYOTA SEQUOIA RELOCATION REQUIRED, SEE NOTE*2
01-02 TOYOTA RAV4 RELOCATION REQUIRED, SEE NOTE*2
91-01 TOYOTA LANDCRUISER RELOCATION REQUIRED, SEE NOTE*2
N/A AUDI A4 FACTORY LOCATION, SEE NOTE *1
98-01 SUBARU FORESTER FACTORY LOCATION, SEE NOTE *1
01-02 SUBARU LEGACY/WRX FACTORY LOCATION, SEE NOTE *1
Installation notes:
*1 Requires removal of factory license plate inserts and enlarging hole to accommodate mounting screw.
*2 Requires relocation from OEM license plate to metal area of bumper. Drilling 3 holes is required. Be sure to check for clearance of wings to bumper.If necessary
mount Light Wing so that the wings are above the bumper.
*3 Due to the unusual shape of the OEM bumper this application will not work without a custom mounting kit. Mounting kits should be available in 2002.
*4 Light Wing can be mounted in factory license plate location which will place the wing low in the center of the bumper. Relocation to the top of the bumper
is possible,but not required.
*5 Requires a custom mount kit that move the Light Wing out to clear the "bumperettes."
*6 Due to construction of bumper a custom mounting kit is required. Due to interior structure of the bumper reinforcement is required.