2000-01 Dodge Ram 1500 4WD 5" Front / 4.5" Rear (except Off-Road).
This Kit uses 3" BLOCKS and ADD-A-LEAFS to raise the rear. Truck SuperLift 5 Inch Lift Kit K332 Dodge CTGLKS CTGSS 2000 2001
We retain the Rams peachy factory ride quality by using taller coils with the stock spring rate. The key to our system is tubular radius arms that replace the factory 4-link setup. We found that on a ½-ton truck, at 5" of lift, the radius arms improve overall control and drivability. The new radius arms are constructed of beefy, 1.5" diameter, .120" wall thickness DOM tubing and feature Urethane eye bushings. Grease fittings at the eye pivot points ensure a squeak free ride and increase
bushing life.
Features:
Replacement pre-set coil springs minimize settling Relocating the track bar prevents steering wheel kick and stud bind Front anti-sway bar relocation brackets prevent bar pre-load Tubular radius arms improve driveability Greasable radius arm eye bushings for long, squeak-free life Front / rear compression travel stop brackets eliminate over-compression Front extension travel limiting straps prevent over-extension Special pitman arm relieves drag link angle Front / rear Superide shocks with yellow boots included, other boot colors available in Related Products below Recommended Tire Size: 35" x 12.50" on a standard offset wheel.
Limited Lifetime Warranty. Foot Notes:
26- Pitman Arm included in kit box.
36- Minor welding required.
82- Can use 4520 spacer if truck leans.
