2000-06 Chevrolet/GMC Silverado / Sierra 1500 4WD (except 1500HD) (2000 New Body Style) 6-7.5 in. Front / 5 in. Rear. Truck SuperLift 7 Inch Lift Kit K364 Chevy Chevrolet GMC CTGLKS CTGSS 2000 2001 2002 2003 2004 2005 2006
This Kit uses 5 inch BLOCKS to raise the rear.
*** This kit will NOT work with AWD, StabiliTrac(VSC), or Electronic Controlled Shock Models(AutoRide). Vehicles with AutoTrac require replacement Front Driveshaft - See Related Products below.
The factory upper and lower control arms are lowered in relation to the frame, which brings ride height up. By keeping the factory control arms and torsion bars, we are able to retain stock alignment geometry and ride quality.
The front differential assembly is also lowered, via plate steel bracketry, to keep CV axle angles in check. Superlift's new control arm brackets tie into crossmembers that span the distance between each frame rail along with optional "kicker" braces to form an exceptionally strong assembly. See Kicker Braces in Related Products below.
The vehicle steers through a centerlink. Bracketry lowers the factory centerlink to keep the tie rods in phase with the lower control arms. A greasable stabilizing link regulates centerlink movement and reduces the load and stress transmitted to the pitman and idler arms.
Superlift's lift method does not increase front track width or require the front differential housing to be trimmed, as is the case with most replacement knuckle systems.
Features
2000 and Newer GM 6"-7.5" system includes front multi-shocks. Retains factory ride quality, steering geometry, and CV axle angles Front track width not increased Front differential housing does not require trimming Load bearing bracketry made of 0.1875" thick plate steel or DOM tubing Full-width control arm crossmembers provide lateral rigidity Centerlink stabilizing link makes steering more responsive and extends pitman / idler arm life Longer factory style front anti-sway bar links prevent bar pre-load Front/Rear Superide shocks with yellow boots included, other boot colors available in Related Products below Recommended Tire Size: 35"-36" x 12.5" tire on 8" wide wheel with factory back spacing.
Foot Notes:
1- 2000-06 Models with Autotrac require dual cardan driveshaft, See Related Products Below. Non-Autotrac models may also require driveshaft if regularly driven in 4WD over 35 MPH.
25- Kit includes dual front dual shock mounting brackets and 6 shocks with yellow boots
27- Special puller tool is recommended to load/unload torsion bars.
