2007-09 Chevrolet/GMC Suburban/ Tahoe/ Yukon/ Yukon XL 1500 (1/2 ton) 4WD 6 in. Front / 5 in. Rear FRONT COIL SPACER LIFT. 2007 2008 2009 Truck SuperLift 6 Inch Lift Kit K896 Chevy Chevrolet GMC CTGLKS CTGSS
This Kit uses 5 inch BLOCKS to raise the rear.
*** This kit is designed for trucks WITH Stabilitrack.
*** Will Not fit Yukon Denali models.
*** This kit fits trucks with or without Factory Electronic Shocks.
The stock upper control arms remain in their factory location, while crossmembers relocate the lower control arms downward 5 inches. New cast ductile iron knuckles span the increased vertical distance between the upper and lower arms. Superlift's knuckles yield the best possible alignment specifications - they maintain zero degrees of additional camber and toe angle change throughout the suspension travel cycle. This produces rock-solid drivability traits, plus our knuckle design accepts the factory spare tire and wheel.
Beefy lower control arm crossmembers, and the remainder of each system's load-bearing bracketry, are laser cut from 1/4 in. thick plate steel. On 4WD versions the front differential is lowered a full 4 inches to reduce CV axle angle and premature axle component wear. Additionally, the front differential's structural integrity is not compromised since no cutting is required. Also, the factory front drive shaft is retained.
A new differential skid plate connects and strengthens the front / rear crossmembers while protecting the 4WD front axle's center section. Kicker braces, with Urethane bushed eyes, span from the rear crossmember back to the frame to increase rigidity.
Features
Replacement knuckle system installs quick and easy, plus the vehicle can be returned to stock later if desired. Front Coil Spacer Kit retains factory ride quality. Rear Lift: 5 inch Blocks System includes rear superide shocks with yellow boots, other boot colors available in Related Products below Recommended Tire Size: 33 in.- 35 in. x 12.50" tire on 8.5" wide wheel with 5.5" to 6" backspacing, (35 inch tires may require fenders to be trimmed).
Foot Notes:
36. Minor cutting and/or welding required.
134. Can run 18" or 20" stock wheels with oversized tires. 17" stock wheel & tire can be used a a spare Only. Aftermarket wheels require specific backspacing; 5.5" min. to 6" max.
